Finishing of cotton and bast fibres: Difference between revisions
From Efficiency Finder
Jump to navigationJump to search
(New page: Back to EFFICIENCY FINDER FOR TEXTILE INDUSTRY *;Additional information *;Cotton finishing ...) |
(No difference)
|
Revision as of 11:30, 10 November 2010
Back to EFFICIENCY FINDER FOR TEXTILE INDUSTRY
- Cotton finishing Flowsheet
a) Typical wet processing for fabrics
b) Typical process sequence for the finishing of cotton knitted fabric
c) Typical process sequence for the finishing of cotton woven fabric
- Typical parameters of the process
Techniques | Temperature [°C] | Pressure (bar) | Heat transfer medium | Residence Time | Additional information | Literature |
New technology: plasma treatment | not above 60 | 50-150 Pa | gas transformed to plasma in an electrical field |
- Energy consumption
Fibres/Fabrics etc. | Process/technique | Total energy consumption [kWh/kg] | Electricity [kWh/kg] | Water consumption [l/kg] | Literature |
yarn, mainly CO | finishing mill | ca. 11 | 2 | 70-120 | BAT in textile industry 2003 |
knitted fabric, mainly CO | finishing mill | 6-17 | 1-3 | BAT in textile industry 2003 | |
woven fabric, mainly CO | finishing mill | 8-20 | 0,5-1,5 | BAT in textile industry 2003 |