Search results

'''1. OBJECTIVE'''

'''1. DESCRIPTION OF TECHNIQUES, METHODS AND EQUIPMENT''' ...the groups NH-CO and NH2 – in the polymer chain, acid, basic, reactive and 1:2 metal-complex dyes (ionic) can also be used. However, in practice acid le

;1. Solar integration

1.'''Spray drying''':

...(H2O-LiBr) for water cooling; re-cooled with water (example temperatures) [1] Table 1: Characteristics data of absorption chillers for the production of chilled

{| border="1" style="text-align:center"

<br/>'''1. OBJECTIVE''' ...ividual zones of the multistage bottle cleaning process are the following: 1)soak, 2)caustic bath, 3)1st zone of hot water tank, 4)2nd zone of hot water

<br/>'''1. GENERELL INFORMATION''' ...ividual zones of the multistage bottle cleaning process are the following: 1)soak, 2)caustic bath, 3)1st zone of hot water tank, 4)2nd zone of hot water

<br/>'''1. GENERELL INFORMATION''' ...ividual zones of the multistage bottle cleaning process are the following: 1)soak, 2)caustic bath, 3)1st zone of hot water tank, 4)2nd zone of hot water

'''1. OBJECTIVE'''

'''1. GENERAL INFORMATION'''

...nly called “chrome plating”. They consist of a very thin chromium topcoat (1%) over an undercoat of nickel (99%). Nickel provides a very smooth, brillia

== 1. GENERAL DESCRIPTION: == ;1.1 General Flowsheet of cake production:

<br/>'''1. DESCRIPTION OF TECHNIQUES, METHODS AND EQUIPMENT''' ...ems were estimated to be $0.25/barrel ($0.2/hl), compared to $1.7/barrel ($1.4/hl) for tunnel pasteurizers (Dymond, 1997). Since flash pasteurization is

...r to close to the acid dew point before it enters the economiser.Typically 1% of fuel use is saved for every 25 degrees celsius reduction in exhaust gas ...r to close to the acid dew point before it enters the economiser.Typically 1% of fuel use is saved for every 25 degrees celsius reduction in exhaust gas

;Figure 1 Overview of Emerging Technologies

'''1. OBJECTIVE'''

...t (AC) is applied. This deposits oxide of the other metal which penetrates 1 – 5 μm deep into the pore of the alumina, with the residual oxide layer

...all along the line, breweries have usually industrial-sized energy needs [1]. Energy is needed for the production of beer, but also clean resources li '' Figure 1: Environmentally-friendly beer production in Murau [3][7]''

'''1. OBJECTIVE'''